NewAccessories
DJI AP100 Parachute
The DJI AP100 is a safety parachute for the Matrice 400. If the flight fails it opens automatically or on command and brings the drone down at no more than 5 m/s. Built for safer flights near people and structures.
NewDJI EnterpriseAccessories
DJI D-RTK 3
Product overview
The DJI D-RTK 3 is a multifunctional GNSS station that gives DJI drones centimeter-accurate positioning. It works in three modes: base station, relay station and rover. Built for survey mapping, long-range drone operations and GCP measurement.
- GNSS
- GPS, BDS, Galileo, GLONASS, QZSS, L-Band
- RTK accuracy (static)
- 0.8 cm + 1 ppm horizontal, 1.5 cm + 1 ppm vertical (RMS)
- RTK accuracy (tilt, 0°–60°)
- 8 mm + 0.7 mm/° horizontal (under 2 cm within 30°)
- Network RTK calibration
- 1.0 cm + 1 ppm horizontal, 3.0 cm + 1 ppm vertical (RMS)
Made to order, 2–3 weeks
- 12-month official warranty
- Invoices for companies
- Operator training at handover
- Three-mode station: one device works as a base, a relay or a rover
- Many drones at once (base mode): set up one station and several drones connect without extra setup, all at centimeter accuracy
- Longer range (relay mode): extends O4 transmission to keep the drone and controller linked at long distances
- GCP surveying (rover mode): with DJI Enterprise apps and DJI Terra, one workflow from point measurement to processing
- Tilt surveying: a built-in IMU calculates attitude and heading, supporting tilted measurements
- Network RTK: centimeter-level accuracy without a prior survey
- Automatic PPP convergence: DJI's own PPP solution reaches accuracy automatically via satellite
- Stable under ionospheric activity: steadier results than network RTK
- Resists multipath interference: reduces errors caused by reflections
- Raw data for PPK: records raw satellite observations for local PPK processing in DJI Terra
- Complete mapping solution: with RTK-capable drones, runs high-accuracy survey workflows end to end
- Built for tough conditions: a protected, shock-resistant design
| GNSS | GPS, BDS, Galileo, GLONASS, QZSS, L-Band |
|---|---|
| RTK accuracy (static) | 0.8 cm + 1 ppm horizontal, 1.5 cm + 1 ppm vertical (RMS) |
| RTK accuracy (tilt, 0°–60°) | 8 mm + 0.7 mm/° horizontal (under 2 cm within 30°) |
| Network RTK calibration | 1.0 cm + 1 ppm horizontal, 3.0 cm + 1 ppm vertical (RMS) |
| Satellite PPP (20 min) | 30 cm horizontal, 40 cm vertical (RMS) |
| Initialization reliability | >99.9% |
| Video transmission | O4 Enterprise |
| Range (base mode) | up to 40 km with the Matrice 400 (FCC); up to 15 km with other aircraft (FCC) |
| Range (relay mode) | up to 25 km between aircraft and station (FCC) |
| Runtime | relay 4 h, base 7 h, rover 10 h |
| Battery | LiPo, 6500 mAh, 46.8 Wh |
| Charging | USB Type-C (USB PD 3.0) |
| Ingress protection | IP67 |
| Operating temperature | −20 to 55 °C |
| Size | 163 × 89 mm (without OcuSync antennas) |
| Weight | ~1.26 kg |
| Relay Fixed Deployment version | 163 × 344 mm, ~2.24 kg, −30 to 55 °C, PoE powered |
| Supported aircraft (base mode) | Matrice 4 series, Matrice 3D/3TD, Matrice 300/350 RTK, Matrice 400, Matrice 30 series, Mavic 3 Enterprise series, DJI FlyCart 30, Agras (T60, T50, T25, T40, T20P), Inspire 3 |
| Supported aircraft (relay mode) | Matrice 4E, Matrice 4T |
| Rover mode | with DJI Enterprise apps and DJI Terra |
| Note | accuracy, range and compatible devices depend on measurement conditions and regional standards (FCC/SRRC/CE). Values were measured under open sky with no interference |
Surveying, cartography and GCP measurement
Construction and infrastructure mapping
Mining and quarry surveys
Long-range operations (relay)
Agriculture, Agras and FlyCart operations
Extending automated flight networks with DJI Dock
Brochure in Mongolian
Specifications and features translated into Mongolian, as a PDF.
Similar products
NewAccessories
DJI O4 Ground Station
The DJI O4 Ground Station is a ground station for O4 Enterprise Enhanced video transmission. It reaches 40 km with the Matrice 400 and 30 km with other drones, and works as a relay for the DJI Dock 3. Rated IP67, working down to −40 °C and powered over Ethernet, it suits permanent installations.
NewAccessories
DJI Manifold 3
DJI Manifold 3 is an onboard computer with up to 100 TOPS of AI compute for Matrice 400, Matrice 4 and Matrice 4D series drones. Run your own AI models and applications on the drone and process data during the flight.
NewAccessories
DJI FlightHub 2 AIO
DJI FlightHub 2 AIO is a ready-to-run server with the FlightHub 2 On-Premises platform and a modeling module pre-installed. Manage DJI Docks and drones on your own network and keep the data in-house. One unit connects up to 20 devices.
