GNSS receivers and radios
Trimble R12i
GNSS rover with calibration-free, magnetically immune tilt compensation and the ProPoint engine.
GNSS receivers and radios
Centimeter RTK, base stations and correction radios.
10 products
NewGNSS receivers and radios
Trimble R980
Integrated GNSS system with Trimble ProPoint and TIP IMU tilt compensation (no need to level the pole), a 4G LTE modem, a 450/900 MHz radio and 672 channels. Light and compact.
GNSS receivers and radios
Trimble R12
672-channel GNSS system with Trimble ProPoint and Trimble 360 technology that works well in tough conditions such as under trees and between buildings. With SurePoint eBubble tilt compensation.
GNSS receivers and radios
Trimble R780
Integrated GNSS system for harsh conditions, rated IP68 and MIL-STD-810G (Model 2). With IMU-based Trimble Inertial Platform (TIP) tilt compensation. Available as base and rover, rover or base.
GNSS receivers and radios
Trimble R750
Modular GNSS receiver for base stations (Model 2), with a 450/900 MHz UHF radio, a worldwide 4G LTE modem, Wi-Fi, Bluetooth, a four-line display and USB-C charging.
GNSS receivers and radios
Trimble R8s
Integrated GNSS system you can buy as a post-processing, base, rover or base-and-rover configuration and upgrade later. Dual Maxwell 6 chips with 440 channels.
GNSS receivers and radios
Trimble TDL450B
External 450 MHz UHF radio modem for Trimble and other RTK base stations. Bluetooth, IP67 and an all-metal housing; it transmits, repeats and receives corrections.
GNSS receivers and radios
Trimble Catalyst Handle
The Trimble Catalyst Handle is a handle accessory for the Trimble DA2 GNSS receiver that puts the Catalyst GNSS positioning service in your hand with your phone or tablet. Light and ergonomic, it takes mapping and field data collection off the long pole and backpack.
GNSS receivers and radios
Trimble HPS2
The Trimble HPS2 handle combines the Trimble DA2 GNSS receiver with an EDM. Clip on a smartphone for centimetre GNSS measurements and measure hard-to-reach points from a distance; it works with Trimble SiteVision and TerraFlex.
GNSS receivers and radios
Trimble Zephyr 3 Geodetic
The Trimble Zephyr 3 Geodetic is a geodetic GNSS antenna for CORS reference stations and real-time networks. Its Trimble Stealth resistive ground plane absorbs multipath, its phase centre repeats within 1 mm, and it is used in IGS reference frame networks.
